Vinod Chandra S.S., Anand Hareendran S., “Artificial Intelligence & Machine Learning”, Prentice Hall Publishers, ISBN: 978-81-203-4934-6, 2014.
Arun Kumar D V – “Dynamic Analysis of Raising sunken vessels using buoyancy systems”, Lambert Academic Publishing, Germany, ISBN 978-3-659-64180-0
Dhileep M., Ajesh K. Kottuppillil and Babu Kurian, “Orientation and Proportion in Indian Traditional Domestic Architecture”, Interdisciplinary Science Reviews (Accepted).
Sandeep M S – “Behaviour of Steel Fibre Reinforced Rubberized Continuous Deep Beam”, Material Science and Engineering, IOP Science Publication, Vol. 330, No. 1, 2018.
Abhilash Antonyand Sreelekha G.,“Selective intra prediction in HEVC planar and angular modes for efficient near-lossless video compression”, Multimedia Tools and Applications, Springer. Volume 77, Issue 1, pp 1093–1113, Jan 2018 (Thomson Reuter Impact Factor : 1.541)
Sijo Augustine, Mahesh K. Mishra, and N. Lakshminarasamma„ “Control and Operation of Integrated Standalone PV Based Low Voltage DC Microgrid with Hybrid Energy Storage System” IEEE Transactions on Smart Grid, (Under review)
Venugopalan Kurupath, Jens Engstrom, Jan Isberg, Mats Leijon, “Time Domain Modelling and Simulation of a Wave Energy Converter consisting of a Point Absorber coupled to a Linear Generator”, Journal of Energy (Under Review)
Sunny Kuriakose – Dielectric & Mechanical properties of PANI coated Ni0.6 Zn0.4 Fe2O4 Ferrite- Natural rubber composite, International Journal of current Engineering and scientific reasearch, ISSN(Print): 2393-0697, Volume-4, Issue-9,2017.
Abhinanda Roy – “Development of Unit Hydrograph for Thuthapuzha river basin, International Journal of Innovative Research In Science, Engineering & Technology”, Vol 6, Issue 4, April 2017.
Abhinanda Roy – “Development of Spatially Distributed Unit Hydrograph for Bharathapuzha river basin International Journal of Innovative Research In Science, Engineering & Technology”, Vol 6, Special Issue 4, March 2017
Srinivasan Chandrasekaran & P. A. Kiran (2017) Mathieu- “Stability of offshore triceratops under postulated failure, Ships and Offshore Structures”, 13(2), pp. 143-148, DOI:10.1080/17445302.2017.1335578
Srinivasan Chandrasekaran & P. A. Kiran (2017) Mathieu-” Stability of Offshore Buoyant Leg Storage and Regasification Platform”. International Journal of Environmental and Ecological Engineering. 11(9), pp. 768-771, DOI: 10.1999/1307-6892/10007859.
Dhanya Sudarsan – “A Survey on Recent Research in Algorithms for Sequence Development”,National conference on Emerging trends in power Instrumentation & Control-EPIC 2017.
Dhanya Sudarsan – “A Novel Enhancement to Topic Summarization using Machine Legible Lexica”,Wispnet,IEEE Xplore 2017,India.(Scopus Indexed)
Dr.Resmi N.G., Fasila K.A.,E-waste Management and Refurbishment Prediction (EMARP) Modelfor Refurbishment Industries, Journal of Environmental Management, Elsevier 2017.
Dr.Resmi N.G., and Fasila K.A. (2017). E-waste Management and Refurbishment Prediction (EMARP) Model for Refurbishment Industries,Journal of Environmental Management, Elsevier (Impact Factor:4.01), Vol. 201, 1 October 2017, 303–308.
Abhilash Antonyand Sreelekha G., “HEVC – based lossless intra coding for efficient still image compression” Multimedia Tools and Applications, Springer. Volume 76, Issue 2, pp 1639–1658, Jan 2017 (Thomson Reuter Impact Factor : 1.541)
Abhilash Antony and Sreelekha G., “Performance enhancement of HEVC lossless mode using sample-based angular and planar predictions” Signal, Image and Video Processing, Springer . Volume 11, Issue 6, pp 1057–1064, Sep 2017 (Thomson Reuter Impact Factor : 1.643)
Namitha A. S., Sameer S. M., “An Improved Selective Mapping Technique to Reduce Peak to Average Power Ratio in SISO and SIMO OFDM Systems Without Side Information “, Circuits, Systems, and Signal Processing, Springer , vol.36, no.10, pp. 4181–4206,Oct. 2017, (Impact factor=1.694)
Namitha A. S., Sameer S. M., “A Bandwidth Efficient Selective Mapping Technique for the PAPR Reduction in Spatial Multiplexing MIMO-OFDM Wireless Communication Systems “, Physical Communication,Elsevier , vol.25, no.10, pp. 128–138, Dec. 2017. (Impact factor=1.583)
Anand Rajagopal, Sajeeb Rahiman AH, Vinay VN, Alvin Thariyath, ‘Design and Analysis of Mono Composite Leaf Spring’, Imperial Journal of Interdisciplinary Research, Vol-3, Issue-1, 2017, pp 2017-2025.
Sajeeb Rahiman, Alvin Thariyath, Vinay V.N, Arun Kappen, ‘Time Study on Winding of Bobbin for Automotive Relays in Assembly Lines’, IJSTE – International Journal of Science Technology & Engineering | Volume 3 | Issue 07 | January 2017.
Anand Rajagopal, Sajeeb Rahiman AH, Vinay VN, Alvin Thariyath, ‘Design and Analysis of Mono Composite Leaf Spring’, Imperial Journal of Interdisciplinary Research, Vol-3, Issue-1, 2017, pp 2017-2025.
Nitin Verma, Manoj Kumar K., Amitava Ghosh (2016), Numerical modelling and performance of spray from an internal mix nozzle used in SQCL grinding . Journal of Material Processing Technology, 240(2017), 223-232.
Sajeeb Rahiman, Alvin Thariyath, Vinay V.N, Arun Kappen, Mathew Prins Korah ‘Time Study on Winding of Bobbin for Automotive Relays in Assembly Lines’, IJSTE – International Journal of Science Technology & Engineering | Volume 3 | Issue 07 | January 2017.
Prisley Varghese Mathew, Rony Thomas Murickan, Juby Joseph, Vipin Vijayan, “Investigation of emission properties & performance characteristics of Biodiesel from chicken waste”, International Journal of Engineering Research & Technology, Volume 6, Issue 5, May 2017, 51-55.
Gincy P Kuriakose – “ Power and Individuality in the Dystopias of 1984 and Hunger games , a study based on Michel Foucault’s The Subject and Power” in the biannual research journal, Singularities, volume 3 issue 1 – January 2016, ISSN 2348-3369.
Vrinda S punnakkal1, haisel mathew1, k.k vijayan1, and sunny kuriakose2 – Overtone spectrum of poly benzyl amine – analysis using local mode model, International Journal of Scientific Engineering and Applied Science (IJSEAS) – Volume-2, Issue- 1, January 2016 ISSN: 2395-3470
Abhinanda Roy -“A comparative study on the derivation of Unit Hydrogen for Bharathapuzha river basin. Elsevier Procedia Technology”, Vol 24, 2016.
Sandeep M S -“Determination of strut efficiency factor for concrete deep beams with and without fibre”, Advances in Computational Design, Vol. 1, No. 3, 2016.
Serin Sara Roy – “Estimation of Travel Time In Urban Streets using various Modes”. International Journal of Innovative ResearchIn Engineering And Management, Vol 3 Issue 6, November 2016.
Jency Thomas – “Chat application for android devices within and out of Direct Bluetooth Range”, in National Symposium on Emerging Treds in Compting & and Informatics (NSETCI-2016),12 July 2016.
Aravind Muraleedharan, Vivek S, Abin Alias, Aswindev, Sarah Abraham, Mahalingam P.R, “An algorithm for automating financial savings decisions – A neural-network inspired approach”, Proceedings of KETCON 2016, January 2016.
Aiswarya Shajan, M.Harikrishnan, Jerin Peter George, Jerin Jose, and Resmi N.G. (2016). Q-Pay: Android Application for Smart Payment,International Journal of Advanced Computational Engineering and Networking, ISSN: 2320-2106, 4(9).
Dr. Arunkant A Jose – “Retinal fundus image enhancement using CUDA enabled GPU NVIDIA GT 720M”, in International Journal For Technological Research In Engineering,(ETEBMS – November 2016), ISSN 2347 – 4718.
Namitha A. S., Sameer S. M., “A Combined Technique for Carrier Frequency Offset Estimation and Peak-to-Average Power Ratio Reduction in OFDM Systems Using Null sub carriers and Cuckoo Search Algorithm “, Telecommunication system, Springer, vol. 63, no. 2, pp. 275–285, Oct. 2016, (Impact factor=1.542)
Namitha A. S., Sameer S.M., “A Joint Technique for Sidelobe Suppression and Peak to Average Power Ratio Reduction in Non contiguous OFDM Based Cognitive Radio Networks “, International J. of Electronics,Taylor and Francis , vol. 104, no. 2, pp. 190–203, July. 2016, (Impact factor=0.729)
Kuriakose S. and Lahiri, U., “Design of a physiology-sensitive VR-based social communication platform for children with Autism”, IEEE Transactions on Neural Systems and Rehabilitation Engineering, PP(99), 1-1, 2016.
Kuriakose S., Pradeep Raj K.B. and Lahiri, U., “Design of Performance-Sensitive Adaptive Response Technology for Children with Autism: Usability Study”, Austin J Autism and RelatDisabil. 2(2): 2016.
Chikku Abraham, B. R. Jose, and Jimson Mathew, “A dual source switched-capacitor converter with solar energy integration capability” Int. J. Energy Technology and Policy (2016).
Sijo Augustine, N. Lakshminarasamma and Mahesh K. Mishra, “Control of PV Based Low Voltage DC Microgrid System for Power Sharing with Modified Droop Algorithm” IET Power Electronics, Vol.9(6), pp. 1132 – 1143, May 2016.
Aiswarya S, Sindhura Rose Thomas,”A Novel Energy Regeneration Technique in Brushless DC Motors for Automobile Applications”,International Journal of Advanced Research in Electronics and Communication Engineering (IJARECE) Volume 5, Issue 2, February 2016
John Prince , Justin Baby , Sreehari P S, Anand Rajagopal, ‘Design of a Resizable Display Stand’, International Research Journal of Engineering and Technology, Volume: 03 Issue: 12 Dec -2016, pp 1404-1407
Velayudhan, A K D. (2016). “Estimation of Hydrodynamic Forces and Motion Characteristics of a Trimaran Light Aboard Ship Using Finite Element Method”, International Journal of Engineering Research & Technology, Volume 5, August 2016,ISSN: 2278-0181.
Ajo Joseph Anto, Anand K Nair and Anoop P “Comparative Analysis of Disc Brake Rotors using FEA”. International Journal for Research in Applied Science & Engineering Technology (IJRASET). Vol 4, Issue III, March 2016 . ISSN: 2321-9653
Sebastian C , Shibin Baby and Anthony Tony , Design And Optimization Of Engine Mount Bracket, IJAIEM, Volume 5, Issue 2, February 2016 ISSN 2319 – 4847
Kebin Peter Abraham, Swethalakshmy H , Anthony Tony, Finite Element Analysis of Wind Turbine Blade, IJRASET, Volume 4, Issue 2, February 2016
Kurian Antony, Siva Prasad Murugan, Ajith A , Cijesh.T.John, Deepu Mathew George, George Benedict. Hot Corrosion Behaviour of Laser Melted GP1 Stainless Steel in molten chloride and sulphide environment. Lasers in Engineering ,Vol.0,pp.1-7,2016
Manoj Kumar K., Amitava Ghosh (2016), Assessment of cooling-lubrication and wettability characteristics of nano -engineered sunflower oil as cutting fluid and its impact on SQCL grinding performance, Journal of Material Processing Technology, 237(2016), 55-64.
Pradeepmon, T.G. ;Sridharan, R and Panicker, Vinay V. (2016) ‘Parameter Selection of Discrete Particle Swarm Optimization Algorithm for the Quadratic Assignment Problems’, Proceedia Technology, Volume 25, 2016, Pages 998–1005).
Aswathy M S, Dr. Gylson Thomas, “Improved Model of Induction Motor Drive for Maximising the Torque in Field Weakening Region” in Volume 1, Issue 7 – December 2016 of International Journal of Advanced Research in Management, Engineering and Technology (IJARMET).
Design and Hardware Implementation of a High Efficiency Single Transformer-Less Inverter – International Journal of Research in Engineering and Technology (e-ISSN 2319-1163, p-ISSN 2321-7308). Co Author – Vishal VN – Accepted by International Conference on Signal, Power, Communication, Security, and Computing Applications (ICSPCSCA-2016).
Arun Kappen, Titto John George,Vinay VN . Performance Improvement of a Household Refrigerator by Use of a Phase Change Material. International Journal of Scientific & Engineering Research , Vol 7, Issue 3, March 2016 ISSN 2229-5518
Kurian Antony , 3D Finite element analysis of selective laser melting process, Additive Manufacturing Journal,Vol.1,No.1,pp.14-17, 2015
Rishikesh P H – Published a paper on Intelligent Back Support for Automobiles at 56th Annual project expo publication-2015 at University of Leeds, England.
Kuriakose S.and Lahiri, U., “Understanding the Psycho-Physiological Implications of Interaction with a Virtual Reality based System in adolescents with Autism”, IEEE Transactions on Neural Systems and Rehabilitation Engineering, Jan, 23(4), 665-675, 2015.
Kurian Antony, Siva Prasad M. A Comparison of Corrosion Resistance of Stainless Steel Fabricated with Selective Laser Melting and Conventional Processing” International Journal of ChemTech Research,Vol.7,No.6, 2015
Manoj Kumar K., Amitava Ghosh, Synthesis of MWCNT nanofluid and evaluation of its potential besides soluble oil as micro -cooling- lubrication medium in SQCL grinding, International Journal of Advanced Manufacturing Technology, 77(2015), 1955-1964.
S. Shiva Sai, K. Manoj Kumar, A. Ghosh, Assessment of spray quality from an external mix nozzle and its impact on SQCL grinding performance, International Journal of Machine Tools & Manufacture ,89(2015), 132 -141.
Nimmu Mary Ivan , “Modelling and analysis of Multi-period Distribution-Allocation Problem in a Two-Stage Supply Chain”, Bonfring International Journals,Vol 5,November 2015”
“Nimmu Mary Ivan , “ ACO-Heuristic for a Multi-period Distribution-Allocation Problem in a Single-Stage Supply Chain”, International Journal of Scientific & Engineering Research,Volume 6, Issue 9, September-2015 1428 ISSN 2229-5518”
Chikku Abraham, B. R. Jose, and Jimson Mathew, “ A Multiple Input Variable Output Switched Capacitor DC–DC Converter for Harnessing Renewable Energy and Powering LEDs, Journal of Low Power Electronics, Vol. 11, 1–11, 2015.
Jim George – Design of Kharitnov Polynomial based state feedback controller for Rotary Inverted Pendulum”, International Journal of Science Technology and Engineering, Vol.1, Issue 11, May 2015, ISSN:2349-784X.
Kurian Antony, Arivazhagan.N .Studies on energy penetration and marangoni effect during laser melting process. Journal of Engineering Science & Technology,vol.10,5,2015
Paulson Varghese, M. Siva Prasad, Febin Joseph, Merrin John Varkey, Kurian Antony and A. Sreekanth The Effect of Repeated Repair Welding on the Corrosion Behaviour of Austenitic Stainless Steel and Mild Steel Dissimilar Weldment, Proceedings of International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015), April 9-11, 2015
Sijo Augustine, Mahesh K. Mishra, and N. Lakshminarasamma„ “Adaptive Droop Control Strategy for Load Sharing and Circulating Current Minimization in Low-Voltage Standalone DC Microgrid,” IEEE Transactions on Sustainable Energy, vol.6, no.1, pp.132-141, Jan. 2015 (Citation: Google Scholar-18)
Abhilash Antonyand Sreelekha G., “Highly efficient near lossless video compression using selective intra prediction for HEVC lossless mode,” AEU- International Journal of Electronics and Communication, Elsevier. vol. 69, no. 11, pp. 1650–1658, Sep. 2015. (Thomson Reuter Impact Factor : 2.115)
S. Shilpa Kamath, P. Aparna and Abhilash Antony, “Gradient-oriented Directional Predictor for HEVC Planar and Angular Intra Prediction Modes to Enhance Lossless Compression, “AEU – International Journal of Electronics and Communication, Elsevier(Thomson Reuter Impact Factor : 2.115) DOI:https://www.sciencedirect.com/science/article/pii/S143484111831464X
Neeraja S Menon, Ameenudeen PE “Implementation of OFDM and comparison of PAPR reduction techniques” in 2nd International Conference on Emerging Trends in Technology and Applied Science (ICETTAS’15), pp.137-142, May 2015.
Rinu Jose, Ameenudeen PE “Channel coding using low density parity check codes in AWGN”, in 2nd International Conference on Emerging Trends in Technology and Applied Science (ICETTAS’15), pp.116-121, May 2015.
Dr. Arunkant A Jose – “Highly parallel implementation of retina image enhancement on GPU to enable faster execution”, ARPN Journal of Engineering and Applied Sciences,VOL. 10, NO. 17 9/1/2015 pp. 7684-7686 , ISSN 1819-6608.
Dr. Arunkant A Jose – “FACE DETECTION AND TRACKING ATDIFFERENT ANGLES IN VIDEO USING OPTICAL FLOW“, ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 17 9/1/2015 pp. 7678-7683 , ISSN 1819-6608.
Dr. Arunkant A Jose – “Retinal Fundus Image Enhancement using accelerated parallel implementation on GPU” in International Journal of Engineering Research and General Science Volume 3, Issue 3, May-June 2015, ISSN 2091-2730.
Binu Manohar – International Journal of Engineering Science and Innovative Technology (IJESIT) titled “Modified MAC based fir filter using carry select adders” during 2015.
Binu Manohar – International Journal Of Advances in Engineering Science and Technology (IJAEST) titled “AN OPTIMIZED DESIGN OF THE FUSED ADD-MULTIPLY OPERATOR USING COMPRESSOR” during 2015.
Binu Manohar – International Journal of Innovative Science, Engineering & Technology(IJISET) titled “A fused floating point three term adder” during 2015.
Binu Manohar – International Journal Of Advances in Engineering Science and Technology (IJAEST) titled “ Design and analysis of fast adder circuits in various logics using CNTFET” during 2015.
Namitha A. S., Sameer S. M.,“A Novel Joint Method for Frequency Offset Estimation and Peak-to-Average Power Ratio Reduction in OFDM Systems using Null Subcarriers” , Wireless Personal Communications(WPC), Springer, vol. 83, no. 1, pp. 343–359, Jul. 2015.(Impactfactor=0.951)
Ms. Ammu Susan Sabu, Ms. Sindhura Rose Thomas, Ms. Lekshmi K R, Ms. Anju James,”Passive Anti-Islanding Protection for Grid Connected Solar Photovoltaic Power Plant: A Case Study”,International Journal of Engineering Research & Technology,Vol. 4, Issue 04,April 2015
Vivek S, Mahalingam P.R, “Advanced Smartphone Pedometer using Accelerometer Data”, International Journal of Advanced Research Trends in Engineering and Technology, March 2015.
Sruthi T G – ‘Tunnel Stability under Different Conditions: Analysis by Numerical and Empirical Modelling’, International Journal of Geological and Geotechnical Engineering, Vol. 1, Issue 2 (2015)
Sruthi T G -‘Analysis of Tunnel Stability under Different Conditions along with a Case study’, Conference Proceedings, ISBN 978-93-5258-252-5, Page 33 (2015).
Vipin, V., Kuriachen, B., Manu, R. and Mathew, J., 2014, “Experimental and Finite Element Based Investigations on Powder Mixed Micro-Electrical Discharge Machining Of Ti-6Al-4V Alloy”, Proceedings of the All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), pp. 334-1-334-6.
Anand H.S., Vinod Chandra S.S., “Mining Association Rules Using Improved Frequent-Pattern Growth Algorithm”, International Journal of Applied Engineering Research (IJAER) (ISSN: 0973-4562), Vol. 9, No. 2, pp. 239-246, February 2014.
Kurian Antony, Arivazhagan.N and Senthilkumaran.K .Numerical and experimental investigations on laser melting of stainless steel 316l metal powders. Journal of Manufacturing processes, 16 (2014), pp. 345-355
Binu Manohar – Journal of Emerging Technologies and Innovative Research titled “ HDL Implementation of RC4 Stream cipher for cryptographic applications ” during 2014.
Chikku Abraham, Poornima M S and Babita Roslind Jose, “A Novel Multiple Gain inductorless Buck-Boost DC-DC Converter”, International Conference on Advances in Computer and communication system (ICACC), IEEE – CPS, August 2014, Kerala, India.
Chikku Abraham, Preetha K G, Susan Ninan and Babita Roslind Jose, “Charge Pump Driven High Step Up Converter for Renewable Energy Harvesting”, International Conference on Emerging Trends in Electrical Engineering (ICETREE), Elsevier publications proceedings, August 2014, TKM College of Engineering, Kollam, Kerala, India.
Chikku Abraham, Rakhee R and Babita Roslind Jose, “A Multiple Input Mulitple Gain Switched Capacitor DC-DC Converter with Reduced Switch Count”, International Symposium on Electronic Design (ISED 2014), NIT Surathkal, December 2014, IEEE-CPSMangalore, India.
C. G. Priya, P. Uday Babu, P. R. Mahalingam, Mintu Philip, “A Novel Intrusion Detection Methodology based on Fuzzy Genetic Algorithm with NSL KDD Data Set”, Second International Conference on Emerging Research in Computing, Information, Communication and Applications, Volume 3, Elsevier 2014.
Kurian Antony, Senthilkumaran.K, Dhana Govind Meda. The Effect of Neighborhood Scan Path Exposures on Heat Buildup: Numerical Investigations on the Laser Energy Delivery in Selective Laser Sintering Process, International Journal of Rapid Manufacturing, Vol. 4, Nos. 2/3/4, 2014
Kurian Antony, Arivazhagan.N and Senthilkumaran.K .Studies on Wettability of Stainless Steel 316L powder in laser melting process. Journal of Engineering Science & Technology, 9, 5, 2014 ISSN 1823-4690
Resmi, N.G., & Soman, K.P. (2014). Multiresolution Analysis of Source Code using Discrete Wavelet Transform, International Journal of Applied Engineering Research, 9(22), 13341-13359.
Resmi, N.G., & Soman, K.P. (2014). Abstract Syntax Tree Generation using Modified Grammar for Source Code Plagiarism Detection, International Journal of Computing and Technology, 1(6), 319-326.
Unnikrishnan Kuttan Chandrika, Venugopalan Pallayil, Kian Meng Lim, and Chye Heng Chew. “Flow noise response of a diaphragm based fibre laser hydrophone array.”Ocean Engineering,Volume 91, (2014), Pages 235-242.
Kunal Prasad, Soumava Mukherjee, Kurian Antony, Manikandan M, Arivarasu M, Devendranath Ramkumar K, Arivazhagan N,Investigation on hot corrosion behavior of plasma spray coated nickel based super alloy in aggressive environments at 900°C.International Journal of Chem Tech Research, 6, 1, 416-431, 2014
Kurian Antony, Optimizing the Process Parameters for Laser melting of Stainless Steel Powders, International Journal of Applied Engineering Research , Volume 9, Number 24 (2014) pp. 28605-28610
“Usage of alternate fuel in boiler for cost reduction in a chemical industry” by Clement Tom Scaria, Alvin Thariyath in IJSRP/Vol 4/Issue 3/Mar 2014
Preenu Paul – “Zero voltage transition synchronous rectifier buck converter” in IJEEER, June 2014.
Anjali Varghese, C,Karpagam, M & Alwarsamy, T 2014, ‘Analysis of Leakage Current in Transformerless PV Inverter Topologies’, International Journal of Engineering and Technology, vol. 6, no.1, pp. 453-459, Feb-March 2014
“Evaluating Constant DC-Link Operation of Wave Energy Converter”, Ekström Rickard, Kurupath Venugopalan, Boström Cecilia, Waters Rafael, Leijon Mats – Journal of Dynamic Systems Measurement, and Control, ISSN 0022-0434, Vol. 136, no 1, 014501-Article in journal (Refereed) Published in 2014
Dhanya Sudarsan – “A Novel Approach for DTN Routing Based on Estimation Status with Delivered list update”,IJREAT 2014.
Jency Thomas – “A Novel Approach for Mixed Noise Removal using ‘ROR’ Statistics Combined WITH ACWMF and DPVM” in International Journal of Computer Applications Vol 86, No 17, pp 11-17, January2014.
Mary Lissy P N -“Utilization of Sludge in manufacturing Energy Efficient Bricks” Published in IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE),Volume 11,Issue4 Ver.III (Jul-Aug 2014),PP 70-73.
Nishida A., Smitha K., and Dr. Santhosh G Thampy, “Defluoridation of water using carbon nanotubes”, for a National conference on “Recent advances in Civil Engineering” held at Younus College of Engineering and Technology, Kollam on 21st& 22ndAugust, 2014, and published in International Journal of Engineering Research and Technology (IJERT, Impact Factor: 1.76).
Geethu Chacko – An Improved Single Phase Transformer less Inverter Topology For Cost Effective PV Systems”, | IJMER | ISSN: 2249–6645 |,| Vol. 4 | Iss. 6| June. 2014 | 12
K Meena – Interval-Valued Intuitionistic Fuzzy Ideals of a Ring, Advances in Fuzzy Sets and Systems, Vol. 17, 2014, Issue 1, Pages 49-82.
K Meena – Intuitionistic L-Fuzzy Ideals and Congruences of a Ring, Bharata Mata Journal of Multidisciplinary Studies, Vol. 1, 2014, Issue II, Pages 28-40.
Vipin, V., Kuriachen, B., Manu, R. and Mathew, J., 2013, “Experimental Investigation of Powder Mixed Micro Electrical Discharge Milling Of Ti-6Al-4V”, Proceedings of the Int. Conference on Precision, Meso, Micro and Nano Engineering (COPEN 8), vol. 1, pp. 228-233.
Unnikrishnan Kuttan Chandrika, Venugopalan Pallayil, Kian Meng Lim, and Chye Heng Chew. “Pressure compensated fiber laser hydrophone: Modeling and experimentation.”The Journal of the Acoustical Society of America 134, no. 4 (2013), Pages 2710-2718.
“Cost Deployment in a Refractory Industry” by Alvin Thariyath, Gukan Rajaram in Indian Foundary Journal/Vol 59/No 1/Jan 2013.
Vidya Gopal T V – “Optimized Design of Double Diaphragm Based MEMS Pressure Sensor for Wider Range and Better Sensitivity” in International Journal of Emerging Science and Engineering (IJESE) ISSN: 2319–6378, Volume-2, Issue-1, November 2013.
Priya C G , and Mahalingam P R, “Decision Support Framework Using Karnaugh map and Conditional Probability”, International Journal of Advanced Research in Computer Science and Software Engineering, Volume 3, Issue 7, July 2013.
Rakhee M – “Enhancing the Precision of Walsh Wavelet Based Approach for Color and Texture Feature Extraction in CBIR” Published in International Journal “Cybernetics and Information Technologies”.
Resmi, N. G., & Soman, K.P. (2013). Discrete Wavelet Transform Based Source Code Plagiarism Detection, European Journal of Scientific Research, 107(2), 240-255.
Sajeeb Rahiman AH. Interface Implementation of Manufacturing Industry Agile Supply Chain Nodes Based On Service Agent. International Journal of Engineering Research and Technology. Vol 2, Issue 4, April 2013, e-ISSN 2278-0181
Sajeeb Rahiman AH. Effect of Supply Chain Integration on Information Sharing; Enhancing the Supply Chain Performance. International Journal of Management, IT and Engineering. Vol 3, Issue 6, June 2013, ISSN 2249-0558
Ajith Vijayan, Deepa K ‘Soft Switching Scheme for a Post-Regulated Current-Fed Push-Pull Converter’, International Review on Modelling and Simulations, Vol. 6 N.2, April 2013.
Anjali Varghese,C & Alwarsamy, T 2013, ‘DC Injection Elimination Using Modified Resonant Controller in Unipolar Switched Transformerless H-Bridge PV Inverter’, International Journal of Engineering and Technology, vol. 5, no. 4, pp. 3443-3449, Aug-Sep, 2013.
Aravind Rajagopal, Jyothi G K, “Wind Integrated Battery/Supercapacitor Combination in UPS” , IJEIT 2013.
Jim George -“Design of PID Controller for Double Furuta Pendulum usingKharitnov Theorem”, Bonfring conference proceedings of CISCON 2013, pp: 53-57, ISBN:978-93-82338-93-2.
Prisley Varghese Mathew- “Study on the influence of process parameters on the thickness and microhardness during the sulfuric acid anodization of AA 6061”, International Journal of Engineering & Innovative Technology, Volume 3, Issue 6, December 2013, 110-114.
Rony Thomas Murickan, Kuppan.P, Lakshmipathi. J. “Experimental investigation of Dry Electrical Discharge Machining on SS 316L”, published in the International Journal of Latest Trends in Engineering and Technology (IJLTET), Vol. 2 Issue 3 May 2013. ISSN: 2278-621X.
Rony Thomas Murickan, Kuppan.P, Lakshmipathi. J. “A Review on Dry EDM and Near-Dry EDM Processes”, published in the Journal of Manufacturing Engineering (JME). September, 2013, Vol. 8, Issue. 3, pp 196-199
Rohit.T, Kurian Antony, Arivazhagan.N and Senthilkumaran.K .Studies on absorptivity and marangoni flow during laser sintering. Advanced Materials Research Volume 622, 2013, Pages 531-534
Jithendrababu B L, Renju Kurian and Pradeepmon T G (2013), “Balancing Labor Intensive Assembly Line Using Genetic Algorithm”, International Journal of Innovative Research in Science, Engineering and Technology, Volume 2, Special Issue 1, December 2013
Kurian Antony, Arivazhagan.N and Senthilkumaran.K. Influence of laser melting process parameters on surface roughness behaviour for SS316L powder. Journal of Corrosion Science and Engineering, 16, 2013, ISSN 1466-8858
Jency Thomas – “PLOW Filter for color image denoising” in International Journal of Computer Applications Vol 79, No 13, pp 1-7, October2013.
“Measurement system design and implementation for grid-connected marine substation”, Ekström Rickard, Kurupath Venugopalan, Svensson Olle, Leijon Mats – Renewable energy, ISSN 0960-1481, Vol. 55, 338-346 – Article in journal (Refereed) Published in 2013 (English)
“Optimal Constant DC Link Voltage Operation of a Wave Energy Converter”, Kurupath Venugopalan, Ekström Rickard, Leijon Mats – Energies, ISSN 1996-1073, Vol. 6, no 4 – Article in journal (Refereed) Published in 2013 (English)
“Closed loop control of BLDC motor using a fuzzy logic controller and single current sensor” by Tony Mathew and Caroline Ann Sam, presented at ICACCS 2013, Sri Eshwar collegeofEngineering,Coimbatore, Published in IEEE (10.1109/ICACCS.2013.6938699).
“Modeling and closed loop control of BLDC motor using a single current sensor” by Tony Mathew and Caroline Ann Sam; Published by International Journal of Advanced Researches in Electrical, Electronics and Instrumentation Engineering (IJAREEIE), Volume 2, Issue 6, June 2013.
Abhilash Antonyand Sreelekha G., “Performance improvement of lossless HEVC using updated reference row intra prediction,” International Journal of Multimedia and User Design & User Experience, Recent Science , Vol 25, pp 1109-1113, issue 1 July-2013.
K Meena – Intuitionistic L-Fuzzy Congruence on a Ring, Notes on Intuitionistic Fuzzy Sets, Vol.19, 2013, No.1, 7-20.
Synthesis and electrical characterization of polyaniline multiwalled carbon nanotube composites with different dopants Haisel Mathew, Vrinda S Punnackal, Sunny Kuriakose B. Syamalakumari, Ancy Manuel International journal for Scientific and Research publications, Vol.3, (2013)issue 8.
Pradeepmon, T.G. and Paul, B. (2012) ‘A Simulated Annealing Based Hybrid Algorithm For Solving UFL Problems’,J. Applied Management Science, Vol. 4, No. 3, pp.274–283.
Dhileep M. and Sopna S.Nair, “Effect of Rigid Content on Modal Response Combination”, Proceedings of the ICE – Structures and Buildings, Volume 165, Issue 6, June 2012, 287 – 297.
G. Pradeepmon and, N. Sudarsan (2012), ‘An Improvised Hybrid Heuristic Algorithm for Uncapacitated Facility Location Problems’,Journal of Production Research and Management, Vol. 2, No. 3, pp 1-7.
Prisley Varghese Mathew- “Study of moulding defects in automobile relay cover”, International Journal of Engineering & Innovative Technology, Volume 2, Issue 6, December 2012, 134-138.
Sudarsan, Dhanya, P. R. Mahalingam, and G. Jisha. “Distance Aware Zone Routing Protocol for Less Delay Transmission and Efficient Bandwidth Utilization.” International Conference on Advances in Computer Science, Engineering & Applications. Springer Berlin Heidelberg, 2012. 63-71.
Mahalingam, P. R., and Shimmi Asokan. “Energy-Aware Mobile Application Development by Optimizing GCC for the ARM Architecture.” International Conference on Eco-friendly Computing and Communication Systems. Springer Berlin Heidelberg, 2012. 1-8.
Mahalingam, P. R. “Intelligent Network-Based Intrusion Detection System (iNIDS).” International Conference on Advances in Computing and Information Technology. Springer Berlin Heidelberg, 2012. 1-9.
Mahalingam, P. R. “Three-Way Handshake-Based OTP Using Random Host-Side Keys for Effective Key Transfer in Symmetric Cryptosystems.” Recent Trends in Computer Networks and Distributed Systems Security. Springer Berlin Heidelberg, 2012. 264-271.
Resmi, N. G., & Soman, K.P. (2012). Abstract Syntax Trees with Latent Semantic Indexing for Source Code Plagiarism Detection, International Journal of Advanced Research in Computer Science, 3(3), 546-550.
Jim George – “Stability analysis and design of PI controller using Kharitnov polynomial for rotary inverted pendulum”, Sensors& Transducers journal, Vol. 138, Issue 3,March 2012, pp 104-113, ISSN: 1726-5479.
Jim George – “Design of Adaptive PID controller based on maximum modulus theorem for inverted pendulum on a cart”, Sensors & Transducers journal, Vol.145, Issue 10, October 2012, pp 163-171, ISSN: 1726-5479/
Remya K G, ChikkuAbraham andBabitha R Jose “A slope compensated Current Mode controlled Boost Conveter” International Conference on Eco-friendly Computing and Communication Systems, Kochi, Springer, August 2012, p.p.69-76.
Basil Kumar N K and Chikku Abraham “Analysis and Simulation Study of An Inverter Integrated with Soft Switching for a BLDC Drive System” International Conference on Emerging Trends In Engineering (ICETE’12), NITTE, Karnataka, India, ISBN No. 978-81-923974-0-5, May 2012.
RemnaRadhakrishnan, Salitha K and Chikku Abraham “Position Sensorless Permanent Magnet Brushless DC Motor Drive” International Conference on Emerging Trends In Engineering (ICETE’12), NITTE, Karnataka India, ISBN: 978-81-923974-0-5, May 2012.
Anumol George, K R Varmah and Chikku Abraham “ Simulation of HPF Offline Power Supply for Wide Input Voltage Ranges Using IBFC ” Proceedings of National Conference on Computational Intelligence in Electrical and Electronics Engineering (NCIEEE), Sathyabhama University, Chennai, ISBN: 978-81-909042-6-1, March 2012.
Jassia M A, Caroline Ann Sam and Chikku Abraham “CompactSynchronous Buck Voltage Regulator with ZVS for WideLoadRange ” Proceedings of National Conference on Computational Intelligence in Electrical and Electronics Engineering (NCIEEE), SathyabhamaUniversity, Chennai, ISBN: 978-81-909042-6-1, March 2012.
A.Joy & V.Chakka, “Fast Array Multichannel 2D-RLS Based OFDM Channel Estimator”, Circuits, Systems and Signal Processing, Springer, Nov 2012. [ IF-1.998 ]
C. K. Raju, Ashok Mishra, and P. B. S. BhadoriaSynthesis of sustainability and secureness of software in public applications using deductive-nomological model. ACM Digital Library, New York, NY, USA, pp 579-588 (2012).
Dhanya Sudarsan – “Distance Aware Zone Routing Protocol for Less Delay Transmission and Efficient Bandwidth Utilization” NECO 2012: Advances in Computer Science, Engineering & Applications (edited by David C. Wyld, Jan. Zizka, Dhinaharan. Nagamalai),pp 63- 71,Springer
Dhanya Sudarsan – “A survey on various improvements of hybrid zone routing protocol in MANET”, ICACCI ’12 Proceedings of the International Conference on Advances in Computing, Communications and Informatics Pages 1261-1265,ACM New York, NY, USA ©2012 , ACM.
Sreenu G -“Improving Hybrid Reputation Model Through Dynamic Regrouping”, International Journal of Peer to Peer Networks (IJP2P) Vol.3, No.3/4, July 2012
Mary Lissy P N -“Carbon Foot Print of an educational Institution as a technique for sustainable Development” Published in the International Journal of Engineering and Science, pp:196-200, Vol 1,Issue 2,December 2012.
K Meena – Intuitionistic L-Fuzzy Rings, Global Journal of Science Frontier Research (F) Vol. 12, 2012, No. 14-F, Art.2, 17-31.
Pradeepmon, T.G. and Paul, B. (2011) ‘A hybrid algorithm for uncapacitated facility location problems’,J. Services, Economics and Management, Vol. 3, No. 2, pp.197–206.
Anthony, Tony, Dr Sivakumar Narayanaswamy, Design of a microfluidic chip for three dimensional hydrodynamic focusing in cell cytometry applications.Masters thesis, Concordia University,2011
Raju, C. K. and Mishra, Ashok – Enhancing Sustainability of Software – A Case-Study with Monitoring Software for MGNREGS in India, Communications in Computer and Information Science, Springer Berlin Heidelberg Vol 191, 223 – 233 (2011).
Raju, C. K. and Bhadoria, P. B. S.- Software Secureness for Users – Significance in Public ICT Applications, Communications in Computer and Information Science, Springer Berlin Heidelberg Vol 193, 211 – 222 (2011).
Mahalingam, P. R., and C. Unnikrishnan. “Portability in Incremental Compilers.”, International Conference on Advances in Computing and Communications. Springer Berlin Heidelberg, 2011. 562-569.
Sudarsan, Dhanya, P. R. Mahalingam, and G. Jisha. “A Novel Approach to Represent Detected Point Mutation.” International Conference on Advances in Computing and Communications. Springer Berlin Heidelberg, 2011. 137-144.
Dhanya S – 26th Indian Engineering congress Hosted by The Institution of Engineers(India) titled “A Survey of Fuel cell types & its applications” during December 2011 in Banglore.
Wave Buoy and Translator Motions – On-Site Measurements and Simulations”, Tyrberg Simon, Svensson Olle, Kurupath Venugopalan, Engström Jens, Strömstedt Erland, Leijon Mats – IEEE Journal of Oceanic Engineering, ISSN 0364-9059, Vol. 36, no 3, 377-385 – 385 – Article in journal (Refereed) Published in 2011 (English)
“Lysekil Research Site, Sweden: A status update”, Lejerskog Erik, Gravråkmo Halvar,.. Kurupath Venugopalan,Leijon Mats – 9th European Wave and Tidal Energy Conference, Southampton, UK, 2011 – Conference paper (Refereed) Published in 2011 (English)
“A resonant two body system for a point absorbing wave energy converter with direct-driven linear generator”,Jens Engström, Venugopalan Kurupath, Jan Isberg, Mats Leijon -Journal of Applied Physics, Volume 110, Issue 12, 8 pages, 2011 – Article in journal (Refereed) Published in 2011 (English)
Jim George – “System Modeling and Design pf PI controller using Kharitnov Polynomial for Rotary Double Inverted Pendulum” in Control and Instrumentation System Conference (International Conference), CISCON 2011 held at MIT,Manipal and published it in CISCON 2011 proceedings page No: 392-396.
Jim George -“Pipeline Leak Detection System and Warning using LabVIEW” in Control and Instrumentation System Conference (International Conference), in CISCON 2011 proceedings page No: 658-662.
Mary Lissy P N – “Removal of heavy metals from Wastewater using water hyacinth” Published in the International Journal on Transportation & Urban Development 2011, pp:48-52, Vol 1,Issue 1,April 2011.
Plasma polymerized O-chloroaniline – overtone studies in NIR region. Haisel Mathew, Vrinda S Punnackal, Ancy Manuel, B. Syamalakumari, K K Vijayan, Sunny Kuriakose Asian journal of Spectroscopy, Vol.15,No. 1-4 (2011)27-31
K Meena- Intuitionistic L-fuzzy Subrings, International Mathematical Forum, 6 (2011), No. 52, 2561-2572.
Unnikrishnan Kuttan Chandrika, Jay H. Kim, “Development of an algorithm for automatic detection and rating of squeak and rattle events”, Journal of Sound and Vibration, Volume 329,Issue 21, (2010), Pages 4567-4577.
A. S. Namitha and P. Sudheesh, “Improved Pre coding Method for PAPR Reduction in OFDM with Bounded Distortion,” International Journal of Computer Applications, vol. 2, no. 7, pp. 7–12, Jun. 2010
Dhileep M., Shahul Hameed, and Nagan S., “An Alternate Cut-off Frequency for Response Spectrum Method of Seismic Analysis”, Asian Journal of Civil Engineering (Building and Housing) Vol. 11, No. 3, June 2010, 321-334.
Vibrational Overtone spectra of phenol, o-chlorophenol and p- chlorophenol- effect of concentration on conformations of o-chlorophenol. Sunny Kuriakose, K K Vijayan , K R P Nair, T M A Rasheed Asian journal of Spectroscopy, Vol.14,No.s 3-4, (2010)93-100
Unnikrishnan Kuttan Chandrika, Jay H. Kim, “Development of a new Squeak and Rattle detection algorithm”,SAE International Journal of Passenger Cars- Mechanical Systems, October (2009) vol. 2 no. 1 Pages 1424-1430.
Anand H.S.,Raji C.G., Vinod Chandra S.S., “Computer based prognosis model with dimensionality reduction and validation of attributes for prolonged survival prediction”, Informatics in Medicine Unlocked, Published by Elsevier
Anand H.S., Vinod Chandra S.S., “Association Rule Mining using Treap”, International Journal of Machine Learning and Cybernetics, Published by Springer
Sonia Mathew, Linta Mathew, Navami Krishna R., Brichu Roy,Anand Hareendran S., “Auto–Subtitle Generator” Journal of Computer Based Parallel Programming, Vol. 1 Issue 1, pp. 1-7.
Pradeepmon, T.G. (2009), ‘A PSO Algorithm for Uncapacitated Facility Location Problems’, SJCET Journal of Engg. And Management, Vol. 3, No. 1, pp. 12-14.
M. Sabu Sebastian, K.C. Unnikrishnan, S. Narayanan, “Viscoelastic properties of Kevlar-29 fabric tape strength member”, Mechanics of Materials, Volume 40, Issue 11, November (2008), Pages 949-960.
Chikku Abraham and S. V. Kulkarni, “FDTD Simulated Propagation of Electromagnetic Pulses due to PD for Transformer Diagnostics,” Paper 1569128887, IEEE TENCON 2008, IEEE Asia-Pacific Region 10 International conference, Hyderabad, India, November 18-21, 2008.
Chikku Abraham, Avinash S. Bhangaonkar, and S. V. Kulkarni, “Towards Development of Competence in Simulation and Measurement of Partial Discharge Signals in the UHFRange,” Fifteenth National Power Systems Conference (NPSC), IIT Bombay, December 2008, pp. 436-441.
Dhanya Sudarsan – “Modified Distance Aware Zone Routing Protocol for Less Delay Transmission in MANET”,International Journal of Research in Engineering and Advanced Technology,ISSN:2320-8791.
Dhileep M. and P.R. Bose, “A Comparative study of “Missing Mass” Correction Methods for Response Spectrum method of Seismic Analysis”, Computers & Structures, Vol. 86, Issues 21-22, November 2008, 2087-2094.
Dhileep M . and P.R. Bose, “Seismic Analysis of Irregular Buildings: Missing Mass Effect”, Journal of Structural Engineering, SERC, Vol. 35, No. 5, December 2008-January 2009, 359-365.
Dr. Sindhu Ajith – “Indian Psychological Review” which is an Internationally accepted journal on the topic “Personality and Quality of Life of Victims of Police Torture”. Vol. 69, 2007. Spl.Issue. ISSN 0019-6215
Sunny Kuriakose, K K Vijayan, T M A Rasheed – Overtone spectra of benzaldehyde and salicyladehyde: Evidence for the inhibition of indirect and direct lone pair effects, Asian journal of Spectroscopy, Vol.1, No. 1(2001) 17-23
Sunny Kuriakose, K K Vijayan, S.Shaji, Shibu M Eapen, K R P Nair, T M A Rasheed – Overtone spectra of allyl chloride and allyl alcohol in the near infrared region , Asian journal of Physics, Vol.11, No. 1(2002) 70-74
N I R spectrum of Phenyl hydrazine-a local mode analysis Sunny Kuriakose, K K Vijayan, K R P Nair, T M A Rasheed Asian journal of Spectroscopy, Vol.10, No. 1&2(2006),65-69
Overtone spectra of formamide in the near infrared region: Evidence for the inhibition of lone pair trans effect Sunny Kuriakose, K K Vijayan, S.Shaji,Shibu M Eapen,K R P Nair ,T M A RasheedAsian journal of Spectroscopy, Vol.6, (2002) 43-46.
CH overtone spectrum of Nitromethane: a C3v coupled oscillator analysis using local mode parameters Sunny Kuriakose, K K Vijayan,S.Shaji,Shibu M Eapen, K R P Nair, T M A Rasheed. Spectrochimica Acta A, Vol.60, No. 10(2004) 2283-2286
Overtone spectra of benzyl amine and furfuryl amine- a comparative study K K Vijayan, Sunny Kuriakose, T M A Rasheed Asian journal of Physics, Vol.10, No. 3(2001)
Vibrational Overtone spectra of 2-furaldehyde in the near infrared region K K Vijayan, Sunny Kuriakose, S.Shaji, T M A Rasheed: Asian journal of Physics, Vol.11,No.1 (2002)66-69
Overtone spectra of cinnamaldehyde in the NIR region- Evidence for indirect and direct lone pair trans effects Sunny Kuriakose, K K Vijayan, S.Shaji, Shibu M Eapen,K R P Nair, T M A Rasheed Asian journal of Spectroscopy, Vol.5, No. 4(2001)185-189.
CH overtone spectrum of t-butyl amine: a C3v coupled oscillator analysis using local mode parameters K K Vijayan , Sunny Kuriakose, ,K R P Nair, T M A Rasheed Asian journal of Spectroscopy, Vol.6, (2002)125-131
Vibrational Overtone spectra of o-fluorophenol and the anomalous order of intramolecular hydrogen bonding strengths Usha John, Sunny Kuriakose ,K R P Nair Spectrochimica Acta A, Vol.68, Issue 2(2007)331-336
Dhileep M. and Nagan S., “Effect of Variation of Strength of Concrete on Dynamic Response of Machine Foundations”, The Indian Concrete Journal, Vol. 76, No. 4, April 2002, 237-242.
Dhileep M. and Nagan S., “Synthesis of Modes towards the Dynamic Analysis of Turbo – Generator Foundations”, Power Engineer Journal (Society of Power Engineers , India), Vol.49, No. 1, Jan-June 2002, 1-9.
Sreenu G – “Big Data Analytics: An Expedition Through Rapidly Budding Data Exhaustive Era “, Chapter published in HCI Challenges and Privacy Preservation in Big Data Security , IGI Global.
Susan Z – ‘Design and development of labview based steering wheel angle sensor system’, International Journal of Engineering and Technology , 7 ( 2 )
Suzana Alex – “Supernatural as an Aid to Women’s Desires: Study of Nagamandala and The Dilemma.” ISBN : 978-93-85105-32-6
Gincy P Kuriakose – “Far Away, a theatrical experiment on Dystopia” in the, Journal of Seminar Papers, Explorations Vol : 5. Issue: 3.1. ISSN 2229 – 4783